- Your cart is empty Browse Shop
Service Overview
Professional Septic Pump Replacement to Restore System Function
A failed septic pump means sewage can't move from your tank to the drain field, leading to backups and system failure. Advanced Septic Services provides expert septic pump replacement with same-day emergency service available to get your system working immediately.
Signs Your Septic Pump Needs Replacement
A failing septic pump can lead to backups, system alarms, and costly damage if not addressed quickly. Recognizing the warning signs early can help prevent major repairs and keep your septic system operating properly
Some warning signs your need a septic pump replacement are:
- Septic Alarm Activation - One of the most common signs of pump failure is a septic alarm sounding or flashing. This often indicates that wastewater levels in the pump chamber are rising because the pump is not moving effluent to the next stage of the system.
- Slow Drains Throughout the Property - If sinks, showers, bathtubs, and toilets throughout the home are draining slowly, a failing septic pump may be restricting the movement of wastewater through the system.
- Sewage Backups - Wastewater backing up into drains, floor drains, or plumbing fixtures can indicate a septic pump that is no longer functioning correctly. This issue should be addressed immediately to prevent property damage and health hazards.
- Unusual Pump Noises - Grinding, humming, or excessive vibration coming from the pump chamber may indicate worn components or an aging pump that is nearing the end of its service life.
- Wet Areas Around the Septic System - Standing water, soggy ground, or unusually lush grass near the septic tank or pump chamber can be a sign that wastewater is not being pumped and distributed properly.
- Frequent Electrical or Float Switch Issues - Repeated tripped breakers, pump cycling problems, or float switch malfunctions may indicate a failing septic pump system that requires professional inspection.
If you notice any of these warning signs, Advanced Septic Services can provide a Septic System Inspection to inspect your system, diagnose the problem, and recommend the most cost-effective septic pump replacement solution for your property.
Common Causes of Septic Pump Failure
- Age and Normal Wear - Like any mechanical equipment, septic pumps wear out over time. Most septic pumps last between 7 and 15 years depending on usage, maintenance, and operating conditions. As components age, performance decreases and failures become more common.
- Float Switch Failure - Float switches control when the pump turns on and off. If a float becomes damaged, stuck, or worn out, the pump may stop operating properly, run continuously, or fail to activate when needed. Failed float switches may also indicate the need for a Septic Alarm Installation or replacement.
- Electrical Problems - Tripped breakers, damaged wiring, corroded connections, and power supply issues can prevent a septic pump from operating correctly. Electrical failures are one of the most common causes of sudden pump shutdowns.
- Power Surges and Lightning Damage - Power surges and electrical storms can damage pump motors, control panels, and electrical components. Surge protection can help reduce the risk of premature pump failure.
- Excess Solids in the System - Items that should never enter a septic system, such as wipes, hygiene products, grease, and other debris, can clog or damage the pump. Excess solids place additional strain on the pump and may cause it to fail prematurely.
- Improper Pump Sizing - A pump that is too small for the property's wastewater demands may run excessively and wear out faster. Proper sizing is essential for long-term reliability and performance.
- Lack of Maintenance - Regular inspections help identify worn components, float switch issues, and developing problems before they lead to complete pump failure. Neglecting maintenance can significantly shorten the lifespan of a septic pump.
- Corrosion and Harsh Operating Conditions - Moisture, corrosive gases, and constant exposure to wastewater create a challenging environment for septic equipment. Over time, corrosion can damage motors, electrical connections, and pump components.
If your septic pump has stopped working or is showing signs of failure, Advanced Septic Services can diagnose the issue and recommend the most cost-effective repair or replacement solution. Our team serves acreage owners, farms, rural homes, and commercial properties throughout Central Alberta.
Pump Replacement Process
Our septic pump replacement process is fast and thorough:
- System diagnosis to confirm pump failure and identify underlying issues
- Tank access, pump removal, and tank inspection while open
- New pump selection and sizing for optimal performance
- Professional installation with secure mounting and electrical connections
- Complete system testing before we leave your property
We install all major brands including Ashland , Goulds , Liberty and Little Giant pumps, allowing selection of the right model for your specific system requirements. After replacing your pump, regular Septic System Maintenance can help extend component lifespans.
Key Benefits
Same-Day Emergency Service – Pump failures need immediate attention. We respond quickly with
trucks stocked with common pump models, often completing replacements the same day you call.
Quality Components – We install commercial-grade pumps built for septic environments. Better
equipment means longer lifespan and fewer callbacks.
Proper Sizing – Undersized pumps fail prematurely while oversized pumps waste energy. Our
technicians match pump capacity to your system's actual requirements for optimal performance.
Why Choose Advanced Septic Services?
Expert Septic Pump Replacement
When a septic pump fails, it can quickly lead to alarms, wastewater backups, and other problems that need attention right away. Our team has experience diagnosing and replacing septic pumps for acreages, farms, rural homes, commercial properties, and municipal systems throughout Central Alberta.
We take the time to identify the cause of the problem before recommending a repair or replacement. In many cases, issues can be caused by float switches, electrical components, or control systems rather than the pump itself. Proper diagnosis helps ensure the right solution and prevents unnecessary costs.
If a replacement is needed, we install quality pumps that are properly sized for your system and wastewater requirements. We also test the controls, alarms, and related components to make sure everything is working correctly before the job is complete.
At Advanced Septic Services, we focus on honest recommendations, quality workmanship, and dependable service. Our goal is to get your system operating properly again with as little disruption as possible
Areas We Serve
Advanced Septic Services provides septic pump replacement services throughout Sturgeon County, Parkland County, Leduc County, Strathcona County, Lac Ste. Anne County, Westlock County, and surrounding Central Alberta communities. We also serve St. Albert, Spruce Grove, Stony Plain, Morinville, Gibbons, Bon Accord, Redwater, Fort Saskatchewan, Beaumont, and nearby rural areas.
Whether your septic pump has failed completely, your alarm system has been activated, or you're experiencing drainage issues, our team can diagnose the problem and recommend the most effective solution for your property.
Frequently Asked Questions
Q: How do I know if my pump needs replacement?
A: Warning signs include constant running, failure to activate, frequent alarm activation, sewage backup,
or unusual grinding noises. If your pump is 10 to 15 years old and showing issues, replacement is often
more cost-effective than repair.
Q: What should I do if my septic alarm goes off?
A: Reduce water usage immediately and contact a septic professional. Continuing to use large amounts of water can cause wastewater levels to rise and potentially lead to backups.
Q: How long will a new septic pump last?
A: Quality pumps typically last 10 to 15 years with proper maintenance. Lifespan depends on usage, tank
condition, and whether the system is properly maintained.
Q: Can you replace just the pump or do I need other repairs?
A: We assess the entire system during pump replacement. Sometimes float switches, alarm systems, or
electrical connections also need attention. We'll recommend only necessary repairs.
Q:How long does a septic pump replacement take?
A: Most septic pump replacements can be completed within a few hours once the correct replacement pump is available. Larger systems or additional repairs may require more time.
Q: What causes septic pumps to fail??
A: Common causes include age, electrical issues, float switch failures, power surges, improper sizing, and excess solids entering the system.
Q: Do you replace pumps for commercial and municipal systems?
A: Yes. We provide septic pump replacement services for residential, agricultural, commercial, and municipal wastewater systems throughout Central Alberta.
Q: Can a failed septic pump cause sewage backups?
A: Yes. If wastewater cannot be pumped properly, levels can rise within the system and eventually lead to backups inside the home or building.
For Inquiry
Need Septic Services?
Advanced Septic Services provides septic system installation, inspections, maintenance, pump replacement, alarm installation, and repair services throughout Central Alberta.
Request Service Today